Store your boat in your own yard with this lightweight, easily disassembled cover frame. tools : pencil, slip-joint pliers, rented conduit bender, scratch awl or grease pencil, hacksaw, screwdriver, staple gun, measuring rule, scissors or sharp utility knife.. Build a simple support frame with bottom feeder dollars! keeps water out of the boat in heavy rain and wind.. If your boat cover has stretched from holding water, a traditional boat support pole may not do the job on its own. the full strap system may give you the additional support needed. if you decide the webbing support style system is your best bet,.
Re: my "pvc-based boat cover frame support" build thats interesting. i make a sort of shelter over my pontoon during the winter with enough room so i can get under it to work out of 2 inch pvc and a new tarp.. Make sure you record all measurements accurately to ensure a good fit for your boat cover. you do not want the cover to be too tight as it might easily flip over and fail to cover the boat well. however, you do not want it to be too loose either as it might allow water and other dirt to get into the boat.. The key to success is to keep the cover taut. when it's tight the rain sheds off and none collects. once the rain starts to collect it makes larger and larger puddles until the weight of the water collapses the whole thing. however you make it, the support frame for your boat cover needs to act like a self-supporting tent..
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.